5 Fundamental Principles of Insurance

Insurance is a contract, a risk transfer mechanism whereby a company (Underwriter) promised to compensate or indemnify another party (Policyholder) upon the payment of reasonable premium to the insurance company to cover the subject-matter of insurance. If you are well conversant with these principles, you will be in a better position in negotiating you insurance needs.

1. Insurable interest. This is the financial or monetary interest that the owner or possessor of property has in the subject-matter of insurance. The mere fact that it might be detrimental to him should a loss occurred because of his financial stake in that assets gives him the ability to insure the property. Castellin Vs Preston 1886.

2. Umberima fadei. It means utmost good faith, this principle stated that the parties to insurance contract must disclose accurately and fully all the facts material to the risk being proposed. That is to say that the insured must make known to the insurer all facts regarding the risk to be insured (Looker Vs Law Union and Rock 1928). Likewise, the underwriter must highlight and explain the terms, conditions and exceptions of the insurance policy. And the policy must be void of ‘small prints’.

3. Indemnity. It stated that following a loss, the insurer should ensure that they placed the insured in the exact financial position he enjoyed prior to the loss (Leppard Vs Excess 1930).

4. Contribution. In a situation where two or more insurers is covering a particular risk, if a loss occurred, the insurers must contribute towards the settlement of the claim in accordance with their rateable proportion.

5. Subrogation. It has often been said that contribution and subrogation are corollary of indemnity, which means that these two principles operates so that indemnity does not fail. Subrogation operates mainly on motor insurance. When an accident occurred involving two or more vehicles, there must be tortfeasor(s) who is responsible for accident. On this basis, the insurer covering the policyholder who was not at fault can recover their outlay from the underwriter of the policyholder who is responsible for the incidence.

Posted in general | Tagged , , | Comments Off on 5 Fundamental Principles of Insurance

Insurance Claim Supplements – How to Submit Claim Supplements

A claim supplement is a claim for additional repair or replacement costs. Supplements are commonplace in the claims process. However, if you are a policyholder unaware of your policy rights, you could be walking away from hundreds or thousands of dollars that you are entitled to collect.

Claim supplements usually occur after a policyholder submits a claim, gets paid and gets the repairs or replacements completed. Then, additional damage is discovered some time later.

Many people erroneously think that, once the claim is closed, it cannot be re-opened. And, insurance companies and their adjusters usually don’t rush to tell you how to submit a claim supplement. So, what to do? Let’s look at car insurance claims and property insurance claims.

For any kind of supplemental claim, you must contact your insurance company and give them your original claim number. The best way to notify the company is in writing, sent Certified Mail. That way, you’ll know who signed for the letter. The insurer will have to re-open the claim. You might get the same adjuster as before, but maybe not.

Car Insurance Supplemental Claims

Lots of supplements happen when cars are getting repaired. Many times, hidden damages are discovered when the body shop begins dismantling the car. So, while the insurance company may have issued payment to the body shop from the original repair estimate, they will issue a second check for the supplemental repairs. Happens all the time, no big deal.

However, sometimes post-repair problems don’t show up right away. A good example is the Air Conditioning system. If you have a car wreck in July, you might not notice that your heater is malfunctioning until fall or winter. But when any damages are discovered that can be directly related to the original insured loss, you can submit a supplement. Simply document the damages and their cause and send the supplement to the insurance company. No additional deductible is assessed, since you already paid it once.

Property Insurance Supplemental Claims

Homeowners, Renters or Business insurance claims can find a need for a supplemental claim for some of the same reasons found in car insurance claims. Seasonal issues can bring up damages related to the original loss. But, some other issues might present themselves. You may have an expert’s report that shows additional damage attributable to the original loss. Your contractor may have found hidden damage that must be repaired. In any event, carefully document your claim and submit it to the insurance company.

Be sure that you are collecting all the money you are entitled to collect. Use supplemental claims whenever your claim requires it.

If you have experienced a property loss, whether fire, wind, flood or other, you need to know winning insurance claim strategies. The insurance company will not tell you the claims process, but I will. I will show you how to take control of your insurance claim, and add hundreds or even thousands more dollars to your claim settlement. For more information, go to the website listed below.

Posted in general | Tagged , , | Comments Off on Insurance Claim Supplements – How to Submit Claim Supplements

BCIN? Difference Between Designer, Architect and Engineer According to the Ontario Building Code

As I meet with new clients and friends every day, I commonly hear the same questions “What is a BCIN?” “When is a BCIN required?” etc. Here is some clarification to the public on some important issues about choosing a company to provide you with plans. Please note that this information applies only in the Province of Ontario.

What is a BCIN?

A BCIN stands for ‘Building Code Identification Number’. This number is assigned by the Ministry of Municipal Affairs & Housing, to successful applicants who have completed the requirements outlined in Division C Section 3.2 of the Ontario Building Code. There are two distinct types of BCIN number, individuals & firms. Individuals are people who have completed the exams and have received a BCIN from the MAH; however, they do NOT carry any insurance. As a result this limits the types of projects that the person can do. Firm BCIN’s on the other hand MUST carry valid liability insurance, and depending on the amount of designs fees that a firm charges in a year will dictate the required amount of insurance coverage they must have. Insurance is expensive but it is there to protect you so avoid working with companies who do not have it. For most people, a home is your single largest asset; do you really want to get plans from someone without insurance?

How do I know if I am choosing a registered company?

The Ministry of Municipal Affairs & Housing maintains a database of all registered BCIN holders. The registry is available through a system called QUARTS. Once on the Public Registry, this system allows you to search by the individual’s name, the company’s name or the BCIN #. Once you have found a business or individual, it will bring you to a page with details on the company. It lists the mailing address of the business & contact details. At the bottom it should also show the Registration as ‘Registered Designer’ and the Status as ‘Current’. If it shows up as ‘lapsed or expired’ then this means that they either do not have valid insurance for that year, or that they are late in filing their paperwork.

Do I need an architect or engineer for my project?

Probably not! There have been massive changes to the system in the last few years, opening the doorway for a new title; designers. Architects & Engineers are NOT required for any project less than 600m² (6,458 sq.ft.) and less than 4 storeys. For most residential and small commercial projects, you do NOT need an architect or an engineer. However, and this is important, if the project involves severe structural modifications, an engineer may be requested by the municipality to review the plans. On this note, there is a BCIN exam which will supersede this requirement! If your design company is a registered company in the Category of ‘Building Structural’ then they can complete the plans.

When do I need a BCIN ‘stamp’ for my project?

Depending on the type of project you may or may not need a BCIN number on your drawings. You do not need a BCIN number if the project relates to the construction of a house that is owned by the person who produces the drawings or if it relates to a farm building less than 3 storeys. There are a few other instances, but these are probably the two most important. Often I hear homeowners ask for just the drawings to submit for permit (no stamp). This is allowed, but as the homeowner you must be knowledgeable of the drawings (after all, you are claiming that you have produced them). It is okay to admit to the municipality that you hired someone to draw them for you, but at the end of the day you will be responsible to ensure that the drawings meet code. If the city has approved your building permit based on the drawings and you proceed to build your project to the drawings only to later find out that there is a problem, you will be on the hook to make any necessary adjustments to pass inspection. Most companies will charge from $200 to $2000 for the use of their BCIN number on the drawings. This may seem expensive but it is the security blanket that will keep you safe and ensure that your drawings meet code! I also personally apply for the permits and handle all the paperwork on my client’s behalf when I charge this fee; which most people prefer as nobody likes to stand in line for half a day to submit paperwork to the City.

I hope that this will help to clarify any questions you may have had regarding the requirements of having someone produce building permits for your project. I look forward to working with you, and if you have any questions then please don’t hesitate to ask!

Posted in general | Tagged , , | Comments Off on BCIN? Difference Between Designer, Architect and Engineer According to the Ontario Building Code

Rental Property – The Responsibilities of the Renter and the Owner

When you rent someone’s property, it’s good to know how what your responsibilities are in order not to have inconvenient situations. When some people rent someone else’s property they think that they are responsible only for a few little things and the rest of responsibilities should be taken care by a leasing agent. But usually it is vice versa. When someone rents a house or apartment, they are usually obligated to sign a contract where all the responsibilities of leasing agent and renter are fully described. In case if something happens both parties understand what they are responsible for.

Responsibilities Of Renters

Normally, renters bear responsibility for the area that is around their apartment and for the apartment itself. Usually, these are areas inside the apartment as well as their backyard. So this includes common sense responsibilities and rules of maintenance and cleanliness of the area. Such things such as repairing certain parts of the interior or the exterior or painting the walls are the responsibilities of the renter.

But still, this is not it. Renter is responsible for some other things in leasing agent’s house. If something happens with the bathrooms, the renter is also responsible for fixing it if it’s possible. But if such things happen and that renter doesn’t feel comfortable to accomplish this job she might contact the maintenance contractor for proper help.

Renters must know their responsibilities and always show respect to other renters in their area and not cause damage intentionally. Not picking up trash after yourself if you left it somewhere is the same as intentional littering. Renters that don’t follow these rules are fully responsible for their actions and might be forced to pay fines.

Responsibilities Of Leasing Agents

If something happens with that exterior of the building or the equipment is not working properly then it is the responsibility of the leasing agent. Leasing agent is always supposed to take care of his renters and make sure that they are always provided with all the necessary utilities and that everything is working properly in his apartment. For instance, if problems with water occur in the apartment then the leasing agent he supposed to contact maintenance staff.

And also, one more of responsibilities of a leasing agent taking care of public areas. This is usually that surround that area of the apartment, such as grassy parts of the land.

So basically, the leasing agent is always has to take care of his renters and make sure they don’t have any complaints or concerns. If the leasing agent doesn’t pay attention to any complaints that he’s renters might have, this may lead to having problems with clients or with the local housing authority. Again, if the client or the renter is not provided with what he expected and paid for, he will be very disappointed about the maintenance service. In these cases renter might call a maintenance company to resolve the situation and bill the expense to the owner.

So before you rent an apartment to a renter as a leasing agent make sure that both of the above are working fine. A renter faced with this kind of problems, can contact the department of housing and ask them to provide advice what to do in this situation.

In some cases, leasing agents may break their rules of that agreement and disobey points of the contract. The department of housing is usually responsible for enforcement in this kind of situation and if the renters still have complaints, they have the authority to force the owner to provide a remedy.

Posted in general | Tagged , , | Comments Off on Rental Property – The Responsibilities of the Renter and the Owner

Single Premium Life Insurance – Pros and Cons

Single Premium Whole Life Insurance (SPLI) Explained

Most of the time, when we purchase life insurance, we agree to make monthly, quarterly, or yearly payments. There are some whole life policies which can be paid off, usually over a period of 7 years or more. But another way of purchasing coverage has begun to get more attention lately. This simply involves making one large payment in the beginning. The single premium is set to fund the coverage for the rest of an insured person’s life.

One obvious advantage might be the guarantee that life insurance is taken care of without having to worry about paying any more bills. One obvious disadvantage, as you may have already guessed, is the fact that this first premium must be pretty large.

Who Considers SPLI?

The type of person who may consider this unusual way of paying for a life insurance policy would have a lump sum of cash they are sure they will not need to spend for the next few years. They will also want to leave money to their estate, and they want to turn the cash they have into a larger life insurance death benefit. This way they can be assured they will be able to leave money to their kids, grand kids, or a favorite charity..

Advantages of Single Premium Life

  • Set it and Forget it – You can make on premium payment, and be assured you have funded a lifetime policy.
  • Estate Building – Most of the time, the cash will buy a death benefit of several times the original premium amount. For example, let us say that a healthy 65 year old could turn $12,000 into a $100,000 death benefit to leave behind. That was just an example. Premiums will vary.
  • Cash Value – Since the one large lump sum fund coverage, the actual cash valued of the policy should grow very quickly. The policy may have enough cash value to be borrowed against or cashed in at some future point. The cash value may grow by a set interest rate, or it may grow my some market index, like the S&P 500. This will be specified in the particular policy you buy.
  • Policy Provisions – Policies may have an accelerated death benefit, or provisions for early surrender or using some of the face value while the insured person is still alive in special cases. These cases could include terminal illness or nursing home confinement. These functions can give you a policy which performs “double duty.”

Disadvantages of SPLI

This product is not for everybody. Look at some of the disadvantages to consider.

  • You Need The Money – You must have the lump sum payment. Of course, the premium will vary by the age and health of the insured person, the insurer, and the amount of coverage you buy. The premium is usually several thousand dollars. This must be money that is not needed for the next few years, or ever. If this is in question, you may be better off by buying a policy with multiple payments.
  • Early Surrender Charges or Fees – Here’s why you must use money you will not need to live on. Most policies do have early surrender charges or fees. If you do have to cash in the policy before this term, set in your individual policy, you will probably get back less than you put in. You can only benefit if you can wait until the date of fees or surrender charges has passed.
  • Tax Considerations – These type of policies, purchased with one payment, are considered to be Modified Endowment Contracts (MEC) by the IRS. They do not have all of the tax advantages or regular life insurance.

Example of SPLI

Let us say that a 65 year old retired teacher has a pension and savings which enable her to live comfortably. She also has $12,000 in cash from her own parent’s estate. She would like to turn this cash into a much larger estate she can split with her son and a favorite scholarship fund.

In this case, she is able to purchase a $100,000 single premium life policy. This works out well for her in a few ways. This policy has a provision for an accelerated death benefit in the cash of terminal illness or nursing home confinement, so she does not need to worry about purchasing another long term care policy.

Is Single Premium Life Right For You?

In order to make a good decision, it will help to figure out what you own retirement planning goals are. This product can be a good solution for some people.

Posted in general | Tagged , , | Comments Off on Single Premium Life Insurance – Pros and Cons

Basketball Shooting Fundamentals – How to Shoot a Step Back Jump Shot

If you are a slow, un-athletic player you must adopt the step back jumper and add it to your arsenal of weapons. This is the future of basketball. This move is perfect for any player that is not quick enough to get to the cup and can provide a shooter with another way to score the basketball. The move is actually done more effectively against good defense. If the defense plays it correctly and the step back is unavailable the counter to this move will open up something with even more space to get off a shot or drive.

If you do not know what a step back jump shot is, I will explain it briefly. It is when a player uses the bounce to drive towards the hoop then instead of going straight up to shoot a jump shot he/she creates space between him/her and the defender by taking a step to the side then shoots the jumper. You might be asking, “Well, that doesn’t make sense. Why would the player take this extra step and isn’t that traveling?” The reason the player does not just shoot a regular one-dribble pull up is because the defense is there and has beaten the player to the spot. The player was not quick enough or did not use a good enough move to blow by therefore the only way for the player to get a shot off is to create space with this move. This is not traveling at all if done with the proper footwork.

This move is too difficult to explain its execution in just words so I suggest you search through YouTube for a demonstration if you have never seen it done before. When practicing or coaching this move there are certain things you must be persistent about:

– The “step-back” is actually a side-step. Never step back because you will not give yourself a lane to counter.

– Your last dribble before the move should be your hardest, and in the direction that you are stepping, and your body is then chasing the ball and meeting it to go up into your shot.

– Do not use your off arm to push off of the defense. Use your shoulder to make contact.

– Get into the defender with your body. Before you step back make sure you give him a bump so that he can’t contest your shot.

In the next article I post I will talk about the counter to the step back. This will prove to you this is by far the most unstoppable move if a player can master it.

Posted in general | Tagged , , | Comments Off on Basketball Shooting Fundamentals – How to Shoot a Step Back Jump Shot

Thermal Mugs: Plastic Vs Stainless Steel

The basic design of thermal mugs, whether they are plastic or stainless steel is the same – double wall insulation with a lid to seal the top. But even though stainless steel versions cost more than plastic versions, in the long run, they are the best deal for travelers. They can also be made of ceramic or glass, but those are generally designed for household use and not for travel due to the possibility of breakage.

The main benefits of a stainless steel mug are durability and better insulation. Steel is tough, and although plastic mugs can take a beating, a steel mug can last much longer. This is especially true when compared to the more brittle, hard plastic mugs that are sometimes used to display stylish designs and finishes. Although messy, dropping a steel mug of coffee will not generally cause any damage.

There are three basic types of insulation used; Air, foam or vacuum between double walls. Plastic versions usually use either air or foam. Both work acceptably, but air or foam is not as effective as vacuum insulation. More often than not, steel mugs use vacuum insulation which can keep beverages hot for a longer period of time. This can be quite important especially on long (and cold!) Morning commutes.

Beyond the two primary benefits, there are a few other benefits that stainless steel thermal mugs have when compared to plastic mugs. Plastic, being slightly softer, is more difficult to clean. You can use tough cleansers (making sure they're non-toxic!) On steel, but the same cleansers will scratch and damage plastic. For the same reason, plastic mugs tend to retain the flavors of the beverages that have been in them. This is not really a problem if you just drink regular generic coffee every day, but if you use the mug for different beverages, it can be.

When you look at all the factors, durability, ease of cleaning, effective insulation and better flavor, the stainless steel thermal mug is by far the best choice, even though it can be a bit more expensive. The only real benefits of plastic mugs are the lower price in the short run (which can be a big benefit if you lose your mug frequently!) And that they are slightly lighter than stainless steel mugs.

Posted in general | Tagged , , | Comments Off on Thermal Mugs: Plastic Vs Stainless Steel

Last Will And Testament Provision For Burial

A will or testament provides information about the transfer of property, ornaments or land, from the testator to his beneficiaries, after his death. Everyone, regardless of age, needs a will. Without a will people wouldn’t know to whom their assets would go. A will is a general term and is used as the instrument in a trust, while testament applies only to dispositions of personal property.

Besides mentioning, as to who would own the property, after the death of the testator, the last will and testament also provides details about, carrying out the burial of the testator. He appoints an executor, as his personal representative who takes over the responsibility of paying his left over debts, obligations as well as pays for his funeral expenses. However, the executor is not entitled to get any surety bond connected to the last testament.

A testator may mention in his last will, the name of a particular organization that would conduct the rites of his burial or transference. He may also put a clause, which specifies that, his body be sent without autopsy or embalming, to a funeral home designated by the organization. A copy of the last will is given to the funeral home by the organization, as it helps in preparing and facilitating the transportation of the body.

The last will and testament carries details about the testator’s wishes, including whether or not his body be enshrined or entombed at a chosen place after death. Since the rites of burial and transference can be very elaborate, detailed, thorough, and lengthy, the organization may incur an extensive cost to carry out the rites. In such a case, the testator can make pre-arrangements with the organization, by donating money that would assist them in carrying out his last wishes. The appointed executor is responsible to pay for the burial expenses in case the testator has not made such arrangements. The last will and testament provision for burial gives details of performing the final rites as per the wishes of the testator, soon after his death.

Posted in general | Tagged , , | Comments Off on Last Will And Testament Provision For Burial

Life Insurance – Should You Buy A Rider Or Complete Policy For A Spouse, Child Or Dependent?

There are many arguments as to who really needs a complete life insurance package and who needs some form of coverage in the form of rider. Does you really really need a rider if you already have a life insurance policy? Does you child or dependent really need one too?

To answer this question correctly we must understand the basic needs life insurance coverage meets …

A life insurance policy is basically meant for breadwinners or persons who demise will cause hardship for their survivors. Although there are other reasons why people buy life policies this is the main reason.

Some insurers have certain riders to cater for spouses and dependents. Such riders add term life coverage for such a spouse or dependent. It certainly makes more sense to buy a dedicated term life insurance for such a person if you think it's necessary. You'll almost always get a far lower rate per $ 1,000 coverage for the person in question if you get another complete term life insurance policy.

For the dependent, you really do not need any form of life insurance for a child unless you want to start a foundation in their memory or make a donation to their favorite charity if they pass on. If you're thinking in such lines then you'll serve that cause better by getting another life insurance policy for such a child or dependent instead of a rider.

We can make an exception for rare cases (like child actors) where the family fortunes will be dramatically altered if such a child passes on. Life insurance is a real necessity then. Like I explained when I talked about the main reason for a life insurance policy, such a child shares considering to the family's finances. Therefore the loss of that child will result in the loss of such financial contribution with the attendant consequences.

If you've decided to buy a life insurance for yourself, spouse or dependent, you'll get far better rates if you get and compare many quotes from many different insurers. This is due to the difference in rates from insurers for a particular policy could range from a few hundreds to a couple of thousand dollars.

If you already have a policy, you can also reduce your current rates by getting and comparing life insurance quotes from insurers you did not get quotes from before you bought your present policy.

Posted in general | Tagged , , | Comments Off on Life Insurance – Should You Buy A Rider Or Complete Policy For A Spouse, Child Or Dependent?

How to Wash a Microbead Pillow

Every so often, after repeated use, or due to messy accidents, micro bead pillows will need to be cleaned. Unlike memory foam or down pillows where only the pillowcase may be washed, micro bead pillows may be washed, just as long as proper measures are taken in order to prevent the pillow from being destroyed. On many micro bead pillows, the tag suggests that they may only be spot treated. This can be done by scrubbing the spot or spots out with soapy water or any other gentle cleaning solution; bleach should never be used.

However, people with young children or animals often find that the pillow may be too dirty to clean by the spot treating method. Microbead pillows may be washed in the washing machine as long as you are careful. It is important that the pillow is first placed in another pillowcase with the end tied off so it does not fall out during the wash. The pillowcase prevents the microbead pillow from falling apart through the tumbling and rushing water. It is the pillowcase that takes the beating while the microbead pillow remains safe inside while still receiving the cleaning that it needs. A detergent meant for fine fabrics or wool, such as Woolite should be used to further prevent possible tearing of the fabric. Again, no detergent with bleach should be used because it can break down the nylon lycra or spandex outer fabric of the pillow.

Wash the microbead pillow on your washing machine’s gentlest cycle using cold water only; heat risks damage to the microbeads as well as to the outside of the pillow. While washing, one should occasionally check on the pillow to make sure that no harm is coming to the pillow. While this step is not necessary, it is definitely a good idea. After washing, it is incredibly important to remember that the dryer cannot be used to dry it because, once again, the heat would create a terrible, sticky mess of the outer cover of your favorite pillow. However, a dryer may be used to tumble and air dry the pillow as long as no heat is used. To complete drying, the pillow must be hung to drip dry. With certain, higher quality brands of microbead pillows such as Snooztime, regular machine washing and drying is possible, making it easier and also more convenient to clean your favorite pillow. Cleaning microbead pillows properly ensures its owner many more years of comfortable rest.

Posted in general | Tagged , , | Comments Off on How to Wash a Microbead Pillow